This 30 tooth servo gear is most commonly used to drive the 90 tooth hub gear, spaced 48mm away, in order to create a 3:1 ratio. This gear reduction will increase the torque at the hub gear to 3x what the servo produces. This gear may also be used to drive a 30 tooth pinion gear spaced 24mm away for a 1:1 ratio.
Weight | 11g |
---|---|
Material | Brass |
Tooth Count | 30 |
Gear Pitch | MOD 0.8 |
Pressure Angle | 20 Degree |
IP | Patented |